DURALABEL PRO 300 DRIVER

Thank you for your help with getting me on the right track! This option controls how hot the print head gets as part of the printing process; different ribbon formulations, and even different label designs, may need slight adjustments to the Darkness setting. If the same thing happens again, then please contact our support team for help. These are the advanced controls for your printer. How-to Print Banners with Echo.

Uploader: Kajilrajas
Date Added: 5 March 2014
File Size: 65.18 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 15532
Price: Free* [*Free Regsitration Required]

Turn the printer back on and try printing your label again.

DuraLabel PRO Information | Graphic Products

That tells us which version of the printer you have. Double-click on the printer icon to open the Print Queueand look in the Printer menu in the top left for an option to Use Printer Offline. Turn the ribbon rewind knob on the cartridge counter-clockwise a full rotation or so. Loading Supply in 030 DuraLabel Check out our video library!

DuraLabel PRO 300

This may be caused by an incompatible ribbon, or by incorrect instructions that Toro is trying to follow. If you are using a different label design program, please contact our support team for help. Otherwise, there are some settings to correct, which takes only a little longer. Then, try printing your label once more.

New Drivers  E250D DRIVERS

Under Supply Calibrationmake sure that the selection matches the type of label stock in the printer: Redefine your visual communication program with LabelForge and DuraSuite labeling software. Continuous a roll of uninterrupted label stock Black Mark a roll of pre-printed label stock, with a black mark on the backing between labels Die-Cut a roll of pre-cut labels, ready to peel off one by one If you are using Die-Cut labels, the printing ribbon will need to be Premium and not Petroleum-Resistant.

Copy this link to share this video. Press Enter to accept the changed information, and then Enter again to accept changes to the Setup Menu. Correct this selection, and click OK to save changes and close this window. How-to Print Banners with Echo. The printer is not seeing that mark or gap — possibly, not even looking for it.

Bronco Tape Guide Installation.

DuraLabel PRO Series

Then, turn your Lobo back on again. Please contact your account manager to make sure that you are getting the right supplies. The printer is not yet ready to print.

Often, this is the result of a battery problem. The next option, Occurrenceshould be set to After Every Page.

Next, you’ll choose the sensor mode, to match the type of label stock you’re using. Hook it up to your P. Let go of the button during the duralael blinks. How-to Install Floor Marking Tape.

New Drivers  TASCAM 1082 DRIVERS

If you are using Die-Cut labels, the printing ribbon will need to be Premium and not Petroleum-Resistant. Remove any other rolls of label stock from the area of the printer.

Printer Support – Drivers, Manuals & More | Graphic Products

Make sure that each ribbon spool is seated correctly; each spool has a notch on the end that will engage with a tab on the wheel that holds it. If you have a manual cutter, operate it by pressing down firmly on the lighter-colored actuator.

If the error returns again, please contact our support team for help. We’ll guide you to the solution.

The label stock should roll forward, underneath the white roller, between the two movable guides at the back of the print head, through the green C-shaped sensor, and finally forward over the black rubber roller in front.

It’s the jack of all trades.